DRUM TURNERS
The KCB turner is a device for safe turning of molds designed for turning the mold by 90 °. The device allows you to turn molds weighing up to 40 tons. This turner is driven by its own unit. The electric motor with a series of chain gears takes care of a smooth rotation process.
WING TURNERS
KCE Series
The device is designed for safe turning of the mold by 90 °. The device allows you to turn molds weighing up to 40 tons. The whole system can be built into the floor. In this case, it saves your space as much as possible.
This turner is driven by a hydraulic unit with its own oil circulation. The hydraulic unit is driven by an electric motor.
Principle
Features / Benefits
-
accessibility
-
compact flat design
-
the whole system can be built into the floor
-
the type with a load capacity of 40 tons, is only 450 mm high
-
space and operating cost savings
-
stabilization mechanism
-
simple control
-
efficient use of space
-
easy handling of the entire device
-
low construction
-
high load capacity
-
fast rotation process
-
there is no need for a crane during the rotation process
The principle of rotation of the molds consists in a complex hydraulic system driven by its own electric motor. Thanks to the possibility of aligning the construction of the turner into the plane with the floor, it is possible to easily manipulate the molds without the use of cranes by means of mobile handling means. The stable and spacious construction allows the turning of molds with a load capacity of up to 40 tons, while the mold is still flat, so it is easily accessible. Another advantage is the possibility to use the working surface of this turner for service work on the mold.
Time Savings
Thanks to the simple and easy handling of molds, you will save a lot of time. Operator training is also easy.
High Stability
This turner will not fill your entire tool shop, but it does not lose its stability and is completely safe.
Technical Parameters
| Model |
Dimensions (l x w x h) [mm] |
Dimensions of a single wing (l x w) [mm] |
Load capacity (t) |
Weight (kg) |
| KCE 0510 | 2 650 x 1 000 x 275 | 1 000 x 1 000 | 5 | 1400 |
| KCE 1012 | 3 000 x 1 200 x 350 | 1 200 x 1 200 | 10 | 2500 |
| KCE 2016 | 3 950 x 1 600 x 400 | 1 600 x 1 600 | 10 | 4500 |
| KCE 3018 | 4 450 x 1 800 x 450 | 1 800 x 1 800 | 30 | 6500 |
| KCE 4020 | 4 800 x 2 000 x 450 | 2 000 x 2 000 | 40 | 8700 |
Technical Parameters
| Model |
Dimensions (l x w x h) [mm] |
Dimensions of a single wing (l x w) [mm] |
Load capacity (t) |
Weight (kg) |
| KCE 0510 | 2 650 x 1 000 x 275 | 1 000 x 1 000 | 5 | 1400 |
| KCE 1012 | 3 000 x 1 200 x 350 | 1 200 x 1 200 | 10 | 2500 |
| KCE 2016 | 3 950 x 1 600 x 400 | 1 600 x 1 600 | 10 | 4500 |
| KCE 3018 | 4 450 x 1 800 x 450 | 1 800 x 1 800 | 30 | 6500 |
| KCE 4020 | 4 800 x 2 000 x 450 | 2 000 x 2 000 | 40 | 8700 |